EB2 controller with 7 Pin Male/7 Pin Female - Installation is included in price
Simple to set up in minutes, the Elecbrakes electric brake controller can be mounted on any trailer and towed by any vehicle.
Suitable for caravans, trailers, horse floats, and boat trailers, the 10-minute plug-and-play setup eliminates the need to modify your tow vehicle. Complete with custom presets and a smooth proportional brake response, it's time for a seamless towing experience.
Elecbrakes Bluetooth electronic brake controller is revolutionising the towing process by eliminating the need for modification to your tow vehicle. Designed and assembled in Australia, this simple-to-use brake controller can be fitted to any trailer. It is controlled through Bluetooth and can be synced to any Smartphone device (Android or Apple) or the optional Elecbrakes Remote Control.
Elecbrakes employs a high-speed microprocessor and various sensors that continuously samples the operating parameters at over 1,000 times per second. For communication, the device uses the widely adopted Bluetooth 4.0 standard, and the hardware selections yield a Bluetooth device that has long-range capability ensuring high connection reliability and no dropouts under typical operating conditions. This ensures the device can be mounted anywhere on the trailer's drawbar.
The Elecbrakes app provides the user with the ability to monitor, configure programs, and control brake response from the tow vehicle.
Elecbrakes EB2 is normally powered via the tail lights, however, a second preferred Auxillary Power Input from the battery is also provided if the user has a prime towing vehicle. The system has been designed to continue operating even if the Bluetooth signal is interrupted or lost.
Housed in a tough fibre-reinforced housing and encased in urethane, ensuring the electronics are fully protected from water, dust, and vibration.
Elecbrakes EB2 Features
-
Plug and Play
Simple to set up in minutes, the Elecbrakes electric brake controller can be mounted on any trailer and towed by any vehicle. No auto electrician required.
-
Configured To Your Trailer
The Elecbrakes system stores up to 5 configurable brake settings and programs on your trailer depending on your towing requirements e.g. load weight, driving surface and weather conditions.
-
Tow with any vehicle
Monitor, change settings, and control the trailer's brakes from the tow vehicle. No wiring loom is required to be installed in the towing vehicle.
-
Optional In-Car Bluetooth Controller
Elecbrakes can also be operated using the specially designed remote-control unit. Connecting by the best in Bluetooth 4 technology, the remote provides a multi-faceted in-car controller. With a friendly interface, the operator can apply the manual override, and, via the plus and minus buttons, increase and decrease brake response instantly on the trailer's brakes.
-
Elecbrakes App supports Apple Car Play & Android Auto
The Elecbrakes App now supports Apple CarPlay and Android Auto. Adjust your brake response directly from your dashboard. With a few taps, you can optimise your towing to match driving conditions through Apple CarPlay and Android Auto
- Android Auto - Coming soon (mid-April 2024)
-
Precise Adjustments
Use numeric values for brake response settings by increments of 1% ensuring the ideal brake response can be dialed in quickly.
- 2 Year Warranty
